Safety Devices

Emergency Stop Button

If an emergency stop button is pushed in, the wrapper will stop immediately without regard for the machine position.

When the button (Item 1) is pushed in, it will remain in. The button must be either turned or pulled out again before the wrapper can be started.

This button should be pushed in along with disconnecting the power source and locking it out before performing any cleaning, maintenance or mechanical setup procedures.

Safety Interlocks

To prevent accidents, the wrapper is fitted with safety interlocks on the guards that must be kept closed during operation.

Opening any interlocked guard leads to an immediate stoppage of the wrapper. Do not use these guards for a regular cycle stop.

• Interlock at left shown with guard open. When guard is closed, pointed arrows on both interlocks must be aligned.