The Bosch SVE 2510 TW is a continuous motion vertical form fill seal twin tube bagger. Providing high performance packaging, the SVE 2510 TW operates up to 360 bags per minute (180 bags per tube). The SVE 2510 TW offers a compact footprint with forming tubes on 32 inch / 812.8mm centerlines. The controls allow two different package sizes to run at different speeds simultaneously.
The film is continuously and precisely fed from the roll by the vacuum supported indexing system without friction. At the same time, a strong longitudinal seal is formed with minimal overlap. As the film advances, the cross seal jaw makes the top and bottom seals to separate the bag for discharge.
Available bag styles include:
Pillow Gusseted Block Bottom
Facts
Accessible single frame construction is available in stainless steel with NEMA 4 enclosures
Continuous material advance at consistent speed provides maximum reliability
No lubrication in standard configuration
Modular engineering provides for easy component replacement
Easily accessible interior
Offers process monitoring and data-input validity checking
Fast, easy one-part size change
Servo technology permits touch-button program change
100 program memory
See brochure for full list of feature and benefits
Up to 360 bags per minute (dependent on product and film)
Packaging Material:
Film Roll Width: 540mm maximum / 21 inches Diameter: 650mm maximum / 25 inches Core ID: 75mm / 3 inches
Rights to make technical alterations reserved.
Product Protection
Product protection for oxygen sensitive, degassing, or fermenting products.
Product Protection Systems For over 40 years Bosch has been successfully active in the area of product protection and has supplied safe and reliable systems to protect oxygen sensitive foods and to secure a long lasting product quality.
Aroma Protection Valves The aromafin valve offers state-of-the-art technology and is easily attached and processed securely to the inside or outside of the foil by valve applicators that are available for all standard machine models.
Valve Applicators The modular valve applicators are suitable for installation in new and existing packaging lines. Only minor modifications are required to the packaging process.