Collating Robot Feeder Collating your products and placing them directly into wrappers or cartoners with the advanced tracking of a Delta Robot
Facts
Collating and placing your products directly into cartoners or wrappers with the advanced tracking of a Delta Robot.
Fast :
Up to 400 products/minute
Delicated product handling:
Vacuum cup end-effectors
Maximum flexibility:
Production change-over by 1 person in 10 minutes with inexpensive change-over parts
Grippers designed to pick up almost any kind of product
Grouping products and rotating the orientation or changing the spacing to match the infeed chain
Advanced product tracking for precision placement even when products are in motion
Adapts to changes in production flow with speed control of the wrapper or cartoner when applicable
Color touch screen HMI:
Intuitively menu driven windows to set-up, change-over, and run different productions
Compact :
1.3 x 1.7 m (4.2 ft x 5.5 ft) foot-print
Low maintenance robotics:
Designed for 3-shifts a day operation
Fixed position motors and no bending wires for longer life and higher speeds
Composite materials for strength and long life
No lubricants and no gear boxes
Robot arms are collapsible and remountable in 2 minutes
Advance tracking eliminates the 2nd collation chain common to most top loading solutions
Experience:
Over 1300 parallel axis Delta Robots in production today
Function description
Contact
Technical information
Requirements of packaging machine (Cartoner or Wrapper):
Infeed must be as narrow as possible and positioned as close to the collator as possible to minimize the robot trajectories and maximize robot performance.
To exit the Presto the infeed must straddle a cross beam (150 x 150 mm) with the top of the beam positioned 200 mm below the product input height.
If the speed control option is selected the wrapper or cartoner must be capable of letting the Presto control its speed based on production flow
Product range
Minimum
Maximum
Length:
50 mm (2 in)
200 mm (7.9 in)
Width:
15 mm (0.6 in)
120 mm (4.7 in)
Height:
6 mm (0.24 in)
60 mm (2.3 in)
Weight:
10 g (0.022 lb)
1 kg (2.2 lb)
Product requirement:
Single-stream flow via conveyor belt; minimum spacing is 10% of product length
Option:
Grouping products and changing the spacing during the pick-and-place to match the spacing of the infeed chain
Rotating the orientation of products during the pick and place
Turning products on edge before feed placing (maximum product width 60 mm)
Active product guiding into the collator
Adjusting to changes in production flow with speed control of the wrapper or cartoner
Controller located on the frame or separated from the frame a maximum distance of 5 m
CE or ETL certification
Robot speed is dependent on product size and weight. Not all products that fit in the product range can be Placed at the maximum cycle speed. Check with sales support to determine the maximum cycle speed for your application. Technical information subject to change without notice
back to top