Overview
Cross Belt Robot Feeder Placing your production directly into wrappers or thermoformers with vision-guided high-speed Delta Robots
Facts
Placing your production into flow wrappers with vision guided high speed Delta Robots.
Fast:
Up to 400ppm placed directly into the lug chain of a wrapper
Delicated product handling:
Placed directly into the lug chain of a wrapper with no product guiding required
vacuum cup end-effectors or light-touch grippers
Flexible:
Product change-over in 5 minutes with inexpensive change-over parts
Grippers designed to pick up almost any kind of product
Randomly positioned and randomly orientated products are placed with precision
Adapts to changes in production flow
Compact:
1.4 X 2 m (4.5 X 6.5 ft) foot-print: 800 mm belt
2 X 2 m (6.5 X 6.5 ft) foot-print: 1300 mm belt
Low maintenance robotics:
Designed for 3-shifts a day operation
Fixed position motors and no bending wires for longer life and higher speeds
Composite materials for strength and long life
No lubricants and no gear boxes
Robot arms are collapsible and remountable in 2 minutes
Color touch screen HMI:
Intuitively menu driven windows to set-up, change-over, and run different productions
Experience:
Over 1300 parallel axis Delta Robots in production today.
Function description
Contact
Technical information
Wrappers requirement:
A specially designed infeed is required and is an available option with the SIG Doboy Linium wrapper family
Therformer requiremenet:
800 mm maximum width
Product range:
Minimum
Maximum
Length:
20 mm (.8 in)
150 mm (6 in)
Width:
15 mm (0.6 in)
120 mm (4.7 in)
Height:
1 mm (0.04 in)
60 mm (2.4 in)
Weight:
10 g (0.022 lb)
1 kg (2.2 lb)
Capable of handling a wide variety of products in the overstanding product range.
Product product requirements:
Belt conveyor transfer interfacing Delfi standard belt widths of 800 mm or 1300 mm (800mm only when feeding a thermoformer)
Options:
1, 2 or 3 robots depending on the speed requirements (130, 260 or 400ppm)
Multiple Delfi Feed Placers in series
Stacking products in a flight of the lug chain
Rotate the product to the correct orientation during the pick-and-place
Feeders for placing blisters or U-boards in the flights of the lug chain
Feeding a thermoformer in place of a wrapper
Controller located on the frame or separated from the frame a maximum distance of 5 m.
CE or ETL certification
Robot speed is dependent on product size and weight. Not all products that fit in the product range can be placed at the maximum cycle speed. Check with sales support to determine the maximum cycle speed for your application. Technical Information is subject to change without notice.
back to top