 |
Overview
The SVE 3600 WR makes it possible without additional machine height to produce corner seal stand-up bags. The product breakage is minimized. The corner seal width is adjustable and with an offset long seam, provides maximized printing and graphics capabilities at the front and rear panels of the packages
|
Facts
- Reliability: corner sealing with proven continuous motion technology
- No additional machine height required for corner sealing
- Flexible and low waste: off-set longitudinal seam provides full front and rear panels
- Excellent bag quality by reproducible corner seal width
- Easy changeover between corner sealed bags and standard bags
- Optimal product throughput due to the use of round forming tubes
- Higher output: up to 50% increase as compared to intermittent
|
Function description
|
Contact
|
Download video
|
Technical information
|
| |
Technical data of the machine SVE 3600 QR |
|
|
|
Flat Bag: |
|
80mm – 250mm / 3- – 10 inches |
|
|
|
Stand Up Bag: |
|
Width: 50mm – 250mm / 2 – 10 inches
Depth: 45mm – 150mm / 1 3/4 – 6 inches
Total 1.5 Width + Depth + 5 Corner Seal Width: 460mm maximum / 18 inches |
|
|
|
Bag Length: |
|
75mm – 600mm / 3 – 23.5 inches |
|
|
|
Machine Speed: |
|
Stand up bags with corner sealing up to 80 bags per minute
Standard bags up to 120 bags per minute
(dependent on product and film) |
|
|
|
Packaging Material: |
|
Film Roll Width: 800mm maximum / 31 1/2 inches
Diameter: 650mm maximum / 25 1/2 inches
Core ID: 75mm / 3 inches |
|
|
|
Corner seal width (mm): |
|
7–8 |
|
|
|
|
|
|
|
Rights to make technical alterations reserved
|
Startpage Bosch USA
back to top